| |
Overflowing
with energy, your faithful companion does not always know his limits
and can cause problems such as damage to flowerbeds, vegetable beds,
running away, etc. But more seriously, he could be the cause or the
victim of a road accident. Canifence is an ‘invisible’
dog fence which enables you to keep one or more dogs in complete freedom
within a perimeter defined by you without the need for an ugly containment
fence.
An unlimited number of receiver collars can be used with one perimeter
wire so you can contain as many dogs as you wish safely in the same
area. Canifence is adaptable to all types of terrain: open, wooded,
hilly, fenced or unfenced.
Canifence works at full performance with up to 400 metres of wire.
Sample
Setups » |
|
| |
|
Safety, Freedom
& Peace of Mind
‘Invisible’
dog fence enabling you to keep your dog(s) in complete freedom within
a defined perimeter |
|
| |
How
does it work?
A discrete perimeter wire (up to 400m) is placed on the ground, buried
or raised on an existing fence. This wire carries a signal from a
small transmitter unit. The dog wears a discrete receiver collar that
receives a signal when he approaches the perimeter wire.
When you dog first approaches the wire he enters the warning
zone and is warned by a beep from the collar. As he gets
closer to the wire he enters the correction zone
and is corrected by small electrical impulses. As he leaves the area
the impulses stop. After a few days, as the dog learns the boundary
the electrical impulses can be reduced and the collar used to emit
sound beeps only. Eventually the collar can be removed altogether.
(As an alternative, a dummy collar can be used at this stage.)
Adjustments
Canifence can be tailored to any dog and any layout. The zones and
electrical impulse strength are fully adjustable from the control
unit as follows:
Warning Zone: 6m – 0.4m from perimeter wire
Correction Zone: 1.5m – 0.3m from perimeter wire
Impulse Strength: Level 1 (small sensitive dog) – Level 8 (large
dog with difficult temperament)
An unlimited number of receiver collars can be used with one perimeter
wire so you can contain as many dogs as you wish safely in the same
area. Canifence is adaptable to all types of terrain: open, wooded,
hilly, fenced or unfenced
The Dummy Collar
We recommend the use of the Canifence dummy collar (available as an
optional extra) both before and after ‘live’ training.
The dummy collar is worn in advance of training to allow your dog
to get used the size and shape of the real collar so when you do commence
training the dog feels natural and is not preoccupied with the collar
itself. It’s important that the dog does not associate the electrical
impulses with the collar itself. Where this does happen the dummy
collar can be effective when used after training. |
| |
Canifence Kit Includes
- Canifence receiver collar (with short studs and with battery)
- Lithium 3 volt CR2 battery for the collar
- Test lamp
- Pair of long studs
- 100m of perimeter wire
- Set of flags (to mark out perimeter)
- Instruction booklet and full user guide
- CD ROM user guide
- Guarantee certificate
Features
- Two Zones – Warning and Correction
- 8 levels of impulse.
- 6 meter range
- Fully Waterproof Collar
- CE Approved
- 2 year Warranty
Specification– Transmitter
Width 90mm - Height 44mm - Length 90mm.
Power – 220 V AC
Specification - Collar
Width 41mm - Height 34.5mm - Length 58mm.
Weight 90grams (module + battery + strap)
Collar length adjustable from 20cm to 67cm
Power: 3V Lithium CR2 battery (supplied)
Fully Waterproof and shockproof
Canifence is a CE Approved electronic dog
training system
|
|
